SBS Waterproof Membrane price SBS eastomeric bitumen made of SBS modified Sinopec high-quality asphalt as the dip coating, and glass fiber cloth, polyester cloth, etc. as the carcass. anti-aging, good thermoplasticity, high tensile strength, high elongation, strong tear resistance and so on. Description SBS eastomeric bitumen membrane is made of SBS (styrene-butadiene-styrene) thermoplastic elastomer modified bitumen as the dip coating material, and is made of high-quality polyester felt, glass fiber felt, glass fiber reinforced polymer. Ester felt as the tire base, fine sand, mineral granules, PE film, aluminum film, etc. as the covering material, and the elastomer-modified asphalt waterproofing membrane is made by special mechanical stirring and grinding. Features 鈼?Good low temperature performance, can still maintain efficacy at -50 鈩? applicable to both hot and cold areas, especially cold areas; 鈼?Puncture resistance, break resistance, tear resistance, corrosion resistance, mildew resistance, good weather resistance; 鈼?Convenient construction, the hot-melt construction can be operated in all seasons, and the joints are reliable. Technical Data Implement Standard: GB/T18243-2008 NO.ItemStandardResult 1Heat resistance, 潞C90潞C, no flowing, no dripping90潞C, no flowing, no dripping 2Elongation at break, %鈮?533% 3Low temperature flexibility, 潞C鈮?/p>-20潞C no cracking-20潞C no cracking 4Water tightnessWatertight at 0.3MPa 120minWater tightness 5Tension, N/50mm鈮?00555N/50mm Application SBS elastomeric bitumen is suitable for the waterproofing of roofs, basements, toilets, roads, bridges, tunnels, grain depots, parking lots, swimming pools, artificial lakes, anti-seepage canals, cabins, roof gardens, urban greening and other projects of industrial and civil buildings. Anti-seepage and moisture-proof and maintenance works of bituminous roofing. Elastomer (SBS) modified bitumen waterproofing membrane is used for Waterproof buildings in areas and areas with frequent structural deformation. Construction technology The membrane can be constructed by hot-melt method or cold-bond method alone, or by a combination of cold and heat, that is, cold-bond method for large areas, and hot-melt method for lap joints. Construction method Hot Melt Method Use a special hot-melt tool such as a hot-melt spray gun or a hot-melt asphalt truck to bake the lower surface of the waterproofing membrane on the large surface of the membrane, so that the asphalt on the surface of the membrane is shiny to a molten state. Press the roller to make it stick firmly with the waterproof membrane or the base layer. The overlapping area of the membrane should be edge-sealed separately, and the method of hot-melting should also be used for construction. The lap joint of the upper and lower coils shall be the degree of modified asphalt overflowing with hot-melt, and the width is about 2mm. The hot melt method is the most common construction method. Specification Thickness: 3mm, 4mm Length: 10m Width: 1m Surface: PE, Fine sand, Mineral Granule Application: Torch applied Shelf life Stored in a cool, dry and protect area to avoid sun and rain.SBS Waterproof Membrane price website:http://www.waterproofingchina.....com/waterproof-membr